Cirrus Parts and Prices

Occasionally you will need to replace worn or damaged items. The Blaze is a robust design but you will need to inspect all parts periodically to ensure their continued effectiveness and to ensure your safety

Part DescriptionIncludedPrice
       
A1New Blaze complete Ex. Sail yesPOA
A2Blaze Sail if purchased with new boat (North)  495.00
A3Halo Sail if purchased with new boat (North)  525.00
A4Halo Sail if purchased with new boat (Hyde)  495.00
       
B1 Blaze/Halo Trolley   299.00
B2 Combi Base   486.50
B3 Top Cover - Top quality PVC   152.00
B4 Top Cover - Polycotton   205.00
B5 Under cover - nylon with draw cord   148.00
B6 Rudder Bag - fully breathable material   42.00
       
Sa1 North Blaze Mainsail (with loose patches)   664.00
Sa2 North Halo Mainsail (with loose patches)   694.00
Sa3 Hyde Halo Mainsail (with loose patches)   POA
Sa4 Sail Numbers - default RED colour (Blaze)   2.41
Sa5 Sail Numbers - default BLACK colour (Halo)   2.41
       
C1 Blaze/Halo Centreboard   356.00
C2 Blaze Mk1 Rudder blade (Special Order Only)   333.00
C3 Blaze/Halo Mk2 Rudder blade   299.00
C4 RWO MkII Rudder Stock   128.00
C5 RWO Tiller with cleat & end cap   51.62
C6 RWO Adjustable alloy tiller Extension 1.2 to 1.8m yes 59.00
C7 Fixed length alloy extension (1.6m)   68.00
C8 1.65m Bare carbon tube for DIY tiller extensions!   39.25
C10 Replacement Mk1 (21mm Blades) rudder stock (Special order only)   142.75
       
D1a Blaze Superspars M7 mast complete - specify line or wire lowers   665.82
D1b Halo Superspars M7 mast complete with swinging spreaders   698.00
D2 Blaze Forestay   29.21
D3 Blaze Shroud (each) with spreader / wire fitting   31.37
D4 Shroud Adjuster - Allen - double 'fine' holes   9.16
D5 Superspars replacement gooseneck   20.45
D6 Inboard Boom end (Superspars)   9.70
D7 Outboard Boom end (Superspars)   9.70
D8 Blaze Main halyard 4mm x 13.5m kevlar inner   26.45
D9 Superspars mast step   13.78
       
E1 Wing - extending tube (front or rear) - black powdercoated   94.73
E2 Wing - front fixed tube - black powdercoated   49.10
E3 Wing - rear fixed tube - black powdercoated   49.45
E4 Replacement washer and screw kit (4 of each)   5.85
E5 NEW lightweight end 'bungs' for extending tubes   14.60
E6 Carbon 'outer' wing tube (single) Option 171.07
E7 Alloy 2" outerwing tubes - Polished T6 alloy (single) yes 49.35
E8 Outer wing tube end bungs   2.95
E9 Standard Trampoline (pair)   149.86
E10 Rack pins (stainless steel in 5mm)   5.90
E11 100mm hatch complete with 'O' ring   9.96
       
F1 Carbon Boom - complete ready to attach blocks yes 385.00
F2 Carbon Boom - without webbing   340.75
       
F4 Kicker Webbing   25.40
F5 Mainsheet loop type webbing (pair)   13.94
F6 Webbing toestraps (pair)   43.15
       
G1 Blaze Mainsheet (full recommended length)   24
G2 Harken Carbo Hexaratchet 57mm yes 51.75
G3 Harken Carbo 38mm carbon Mainsheet block yes 18.17
G4 Harken Carbo 29/40mm traveller/mainsheet block Option 28.84
G6 Ronstan 20mm single control line block yes 8.30
G7 Ronstan 20mm single control line block with swivel yes 13.90
G8 Ronstan 20mm double control line block yes 20.84
       
H1 4mm Control line per metre (white/yellow/blue)   0.87
H2 5mm Control line per metre (blue)   1.14
H3 4mm Control elastic per metre (black)   0.74
H4 5mm Control line elastic per metre (yellow)   0.88
H5 8mm Centreboard 'down' shockcore per metre   1.37
H6 2.5mm D12 per metre - can easily be spliced for lowers plus tie-ins etc   1.41
H7 4.0mm D12 per metre - can easily be spliced, ideal for kickers   2.82
       
I1 Padded Kneepads - essential!   26.75
I2 Blaze Slot Gasket - cut to length and marked out with template   10.25

New 2010 Boat Options
New boats are supplied fitted with rear sheeting as default and ratchet block off kicker webbing at front of cockpit. 'Traditional' centremain is a priced option. Hulls are generally fitted with Allen Brothers control fittings, Marlow ropes and lines and Harken Mainsheet blocks as default.

Options:1)Stainless tower over plate case for ratchet block£80.00
 2) Harken Swivel Cleat base for ratchet clock on tower£94.00
 3) Non standard Gel Coat colour for hull £120.00
 4) Carbon outer wing tubes in place of standard alloy£265.00
    
Offers: Halo Rigs - First 25 are being offered at £1,175 and include new Halo mast and choice of either North Halo Mainsail OR Hyde Halo Mainsail (saves approx £230 over list price)
- As of 24/12/09 16 rigs remain

How to Order
Simply sent us an email listing the items you want blaze720@btinternet.com or telephone us on +44 (0)1635 200167.

Getting it to you
We use regular carriers like TNT or UPS as well as the Post Office. Generally we can get stocked items to you within 48/72 hours wherever you are located in the UK. Masts are however best collected by you or delivered by us.
Overseas delivery of boats is possible within the European Union and we can arrange shipping of boats and spares beyond.

Not here?
Everything that goes into a Blaze or Halo is available from Cirrus whether listed here or not. Whatever your requirements or problem we can supply or advise you.

w  w  w  .  c  i  r  r  u  s  r  a  c  e  .  c  o  m